hi
Moderator: Moderators
- banner001
- Track day God
- Posts: 2590
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: hi
welcome and have fun, my last rebuild is still on going, 2 years later
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
-
- Posts: 1
- Joined: Fri Feb 01, 2019 7:50 pm
- My Bike: ZXR750/900 conversion
Re: hi
Hi Newbie here, I bought a zxr750 jan 1996, with a 900 conversion last weekend. it has been stood for a few years, luckily the carbs were drained and the fuel tank disconnected. the carbs look great inside.
Ive been doing various jobs getting on it ready for a strip and fettle powder coat parts etc (winter project). i thought before i spend any serious money, i want to here it run first.
Tried some easy start and turning over great, but not firing, checked plugs and no spark.
Oil lights are on idiot lights but no neutral? bike is not in gear. ive tried to start with clutch in and out.
Is this possibly the kill switch maybe? or any other ideas much appreciated
can some1 please point me in the right direction, as where to look on here.
Many Thanks
Tom
Ive been doing various jobs getting on it ready for a strip and fettle powder coat parts etc (winter project). i thought before i spend any serious money, i want to here it run first.
Tried some easy start and turning over great, but not firing, checked plugs and no spark.
Oil lights are on idiot lights but no neutral? bike is not in gear. ive tried to start with clutch in and out.
Is this possibly the kill switch maybe? or any other ideas much appreciated
can some1 please point me in the right direction, as where to look on here.
Many Thanks
Tom