Hi all
can you still get hold of the head gasket from the race kit (11004-1202)
Thanks
Kit Head Gasket
Moderator: Moderators
-
RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: Kit Head Gasket
no idea, best bet would be to call up a dealer with the part number and see. 
-
masterofinsanity
- Site Admin
- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Kit Head Gasket
give Cradley Kawasaki a bell.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
neil_cb125t
- Posts: 43
- Joined: Wed Jan 16, 2008 10:20 pm
Re: Kit Head Gasket
Hi hi
From way down under in NZ,
I took the barrels of and then skimmed them, we took 10 thou off, which took it to the min clearance between piston and head allowed .6mm, it was .85mm. That and porting has made a huge difference! I have since advanced the timimng and put in dialled in cams.
Off to the DYNO in 2 days so will find out how she goes.
From way down under in NZ,
I took the barrels of and then skimmed them, we took 10 thou off, which took it to the min clearance between piston and head allowed .6mm, it was .85mm. That and porting has made a huge difference! I have since advanced the timimng and put in dialled in cams.
Off to the DYNO in 2 days so will find out how she goes.
-
Roykawa
- Posts: 3
- Joined: Thu Feb 14, 2008 5:53 pm
- My Bike: ZXR400R
Re: Kit Head Gasket
Yup cost abt 40 quids mate
