Hi guys I'm putting a gsxr 600 k3 shock on the race bike, does anyone know what you can change the bush in the k3 shock for to take the zxr bolt
Thanks
Rear shock
Moderator: Moderators
-
- Posts: 100
- Joined: Fri Jul 23, 2010 10:50 pm
- My Bike: zxr400 L racebike/R1
Re: Rear shock
I modified the n shape bracket that goes over it (bit with the thread on top that goes through frame) by welding washers on to make the hole smaller then used the GSXR bolt.
zxr400L Race Bikes Competing in EDIASIA F400 and thunderbikes with BMCRC in 2016 and an RD125LC MK1 restoration project
-
- Posts: 63
- Joined: Sat Jun 18, 2011 8:10 pm
- My Bike: ZXR 400 Racebike
Re: Rear shock
Just bore out the bush in the rear shock. You're only taking it out by 2mm diameter so 1mm each side, lots of meat still on it