My zxr before crushed and after, all job by me.
http://img97.imageshack.us/g/dsc01116yy.jpg/
open the engine for a good service
http://img863.imageshack.us/g/imgp0627.jpg/
some photos from the led tail light
http://img576.imageshack.us/g/dsc00029tio.jpg/
Zxr400 to Zx6r Look after crush
Moderator: Moderators
- dayside69
- Posts: 11
- Joined: Sat Jun 12, 2010 3:31 pm
- My Bike: zxr400L6
- Location: Greece
Zxr400 to Zx6r Look after crush
Last edited by dayside69 on Sat Apr 02, 2011 9:56 pm, edited 1 time in total.
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: Zxr400 to Zx6r Look after crush
Full of awesome
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
- cdstirland81
- Posts: 183
- Joined: Sat Jun 13, 2009 8:23 am
- My Bike: ZXR400H1 and proud!
- Location: derbyshire
Re: Zxr400 to Zx6r Look after crush
blinking awesome! want more pics! (and maybe a talk through of the build/fit?)
ameteurs practice and train unitl they can do it, professionals practice and train until they cannot fail at it..
- dayside69
- Posts: 11
- Joined: Sat Jun 12, 2010 3:31 pm
- My Bike: zxr400L6
- Location: Greece
Re: Zxr400 to Zx6r Look after crush
My friend cdstirland81 it wasn't to difficult. I tried to use the original bolt places to fit it.
For the front part the only think i changed was the two side metal parts on the frame.
For the tail , i chop about 4cm of the end of the subframe tail end to fit excactly as i wonted to.
As you can see it is from polyester so you can cut and glue to fit it as you need.
I will try to upload more photos.
Sorry for my english!
For the front part the only think i changed was the two side metal parts on the frame.
For the tail , i chop about 4cm of the end of the subframe tail end to fit excactly as i wonted to.
As you can see it is from polyester so you can cut and glue to fit it as you need.
I will try to upload more photos.
Sorry for my english!
- masterofinsanity
- Site Admin
- Posts: 8101
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Zxr400 to Zx6r Look after crush
nice to see something different done to a zxr400, bet that gets talked about?!
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- dayside69
- Posts: 11
- Joined: Sat Jun 12, 2010 3:31 pm
- My Bike: zxr400L6
- Location: Greece
Re: Zxr400 to Zx6r Look after crush
Uploaded with ImageShack.us
In this pics, http://imageshack.us/g/62/52846340.jpg/ , there is a new exhust end that i make, a stabilizater from a yamaha r1 '05 with custom made mounts by me, fiberglass tail and the original chain cover that i cut to keep it as protector for the water pump.
and a new set of michelin power one (120/70 front 160/60 back),and i loved the way zxr turns with this tyres