hello! i write from Italy! i have a zxr400 1991 with a complete Micron race system exhaust, a k&n air filter and a dynojet kit stage 1. can you tell me the best settings for the dynojet kit? thank you very much!
this is my zxr400 on youtube! ===> http://www.youtube.com/watch?v=o1685v1r3h8
best dynojet kit stage 1 settings for my zxr400 L1
Moderator: Moderators
-
- Posts: 8
- Joined: Wed Sep 12, 2007 12:22 pm
-
- zxr400 oc member
- Posts: 2320
- Joined: Tue Oct 10, 2006 12:32 am
- My Bike: ZXR400-M4, ZX4, ZX6R.
- Location: Herefordshire
Re: best dynojet kit stage 1 settings for my zxr400 L1
depends on the individual bike ..
get it on a dyno.
get it on a dyno.
-
- Posts: 8
- Joined: Wed Sep 12, 2007 12:22 pm
Re: best dynojet kit stage 1 settings for my zxr400 L1
i can't...can you tell me standard settings??? thanks!zimm wrote:depends on the individual bike ..
get it on a dyno.
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
Re: best dynojet kit stage 1 settings for my zxr400 L1
Hi,
I had a Dyno stage 1 on my old engine, I went by the intructions but the bike was running way way way too rich in the mid range. When I got mine set up perfect it was: 3 turns on the mixture screws, top notch on the needles with the 2 washers on the top and 92 main jets. That was with stainless headers, aftermarket can and K&N,
Hope this helps.
Regards
Rich
I had a Dyno stage 1 on my old engine, I went by the intructions but the bike was running way way way too rich in the mid range. When I got mine set up perfect it was: 3 turns on the mixture screws, top notch on the needles with the 2 washers on the top and 92 main jets. That was with stainless headers, aftermarket can and K&N,
Hope this helps.
Regards
Rich
-
- Posts: 10
- Joined: Wed Dec 17, 2008 10:06 pm
- My Bike: ZXR400 L5
- Location: Co. Durham - Land of the Bishop bashers.
Re: best dynojet kit stage 1 settings for my zxr400 L1
Fitted Dyno-jet kit stg1 to L5 model (standard air filter, Art Race end-can, new spark plugs) as per instructions; ie DJ96 main jets, E-clip on 2nd groove down from top, 2 washers placed on top & enlarged slide lift hole with supplied drill. Set mixture screws 2 turns out from fully in.
Bike starts great from cold or hot, runs sweet through all gears at all revs - really pleased!!
Will get carbs tuned & balanced in spring 2009.
Bike starts great from cold or hot, runs sweet through all gears at all revs - really pleased!!
Will get carbs tuned & balanced in spring 2009.