Hey guys, rebuilding rear caliper and after pressing out the bushing that the torque arm connects to I noticed that a small metal ring sits around the bushing. Upon looking at the rear caliper diagram to order one up I've discovered its not there? Bushing part number 42036.
Perhaps it comes with the bushing but I would have thought it would be on the diagram
part not on micro
Moderator: Moderators
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: part not on micro
Hey Cargo, thanks but that's the diagram I was referring to. Its the bush between the two seals that has this small sleeve buts its not on the diagram
Would of helped if I'd had put a Link up in the first place
Would of helped if I'd had put a Link up in the first place
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: part not on micro
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: part not on micro
Unfortunately not, I thought it would be located along with the bolt that goes through the caliper but no luck.
Very odd that its not in the diagrams
Very odd that its not in the diagrams
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: part not on micro
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: part not on micro
Yes that's the sleeve but the bushing doesn't appear in the diagram, maybe I'm just being thick. I'll just clean the old one up and reuse
Thanks guys
Thanks guys
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
- banner001
- Track day God
- Posts: 2590
- Joined: Sat Sep 24, 2011 3:27 pm
- My Bike: ZXR400 L4
- Location: Nuneaton
Re: part not on micro
a photograph of the ring and where it it supposed to seat might be a good idea about now?
UK ZXR400 L3 (1993) - Fully restored and on the roads, my green beast!
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
JPN ZXR250 A2 (1990) - Revs to 19,200rpm... 'nuff said
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: part not on micro
Photo shall follow
- Miles
- zxr400 oc member
- Posts: 504
- Joined: Wed Apr 30, 2008 11:00 pm
- My Bike: ZXR 400 L3
- Location: Bangor, Northern Ireland
Re: part not on micro
Sorry took so long, as you can see the metal ring should be in the hole that the bolt goes in, between the caliper and the bushing but I can't find it on the diagrams anywhere. Without it the bushing and bolt just rattle about.
My only thought is that maybe the steel ring and the bushing come together but the fische shows it as one
I took one out when I stripped the caliper so obv I need to put one back in
My only thought is that maybe the steel ring and the bushing come together but the fische shows it as one
I took one out when I stripped the caliper so obv I need to put one back in
You do not have the required permissions to view the files attached to this post.