CBR 4 Pot Nissin Calipers
Moderator: Moderators
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
CBR 4 Pot Nissin Calipers
Hi,
Will the 4 pot Nissin calipers off a cbr fireblade fit? I know some people have fitted them on here but I dunno what sort of mods you need to do. I heard that you need to grind something away from the forks? Can anyone show me a picture of the cbr calipers fitted to a ZXR?
Regards
Rich
Will the 4 pot Nissin calipers off a cbr fireblade fit? I know some people have fitted them on here but I dunno what sort of mods you need to do. I heard that you need to grind something away from the forks? Can anyone show me a picture of the cbr calipers fitted to a ZXR?
Regards
Rich
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
Re: CBR 4 Pot Nissin Calipers
Hi
Anyone? I'm really starting to dislike my 6 pots.
Regards
Rich
Anyone? I'm really starting to dislike my 6 pots.
Regards
Rich
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: CBR 4 Pot Nissin Calipers
6 pots are great if you can bleed em and get em to work, try some 4 pot nissins off a gixer 1990 ish, think they are the same hole mountings.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- Scott221
- Restricted
- Posts: 909
- Joined: Tue Jan 16, 2007 6:23 pm
- My Bike: ZXR400 L9
- Location: Bham, U.k
Re: CBR 4 Pot Nissin Calipers
Get some K1/K2/K3 4 pots mate. Its exactly what I've done and they've just arrived. I will post a thread up later.
These will fit...
http://cgi.ebay.co.uk/SUZUKI-GSXR1000-K ... 240%3A1318
These will fit...
http://cgi.ebay.co.uk/SUZUKI-GSXR1000-K ... 240%3A1318
One life, Live it!
-
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: CBR 4 Pot Nissin Calipers
There actually the wrong size. They fit the the bikes with the crap 6pots (ie ZX7r, ZX6r, TL ect) but the zxr has 90mm spacing iircmasterofinsanity wrote:try some 4 pot nissins off a gixer 1990 ish, think they are the same hole mountings.
Sorry i dont no if the fireblade calipers fit. I THINK the RSV calipers should fit the spacing but you'll need to get them to line up on the disk.
Generaly for brake conversions your going to have to do a whole load of research yourself fella.
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
Re: CBR 4 Pot Nissin Calipers
Hi,
Thanks for all the info guys! Scott, those Nissins you just shown me on ebay, they're the exactly the same as the cbr 600s and 900s. This is why I thought they might fit but wasn't 100% sure or not. Some people have fitted fireblade Nissins on here somewere, I was just hoping they would see this thread and maybe share some tips on them.
I'll keep an eye for some gsxr k1s tho.
Let me know how you get on with the calipers Scott wont ya
Regards
Rich
Thanks for all the info guys! Scott, those Nissins you just shown me on ebay, they're the exactly the same as the cbr 600s and 900s. This is why I thought they might fit but wasn't 100% sure or not. Some people have fitted fireblade Nissins on here somewere, I was just hoping they would see this thread and maybe share some tips on them.
I'll keep an eye for some gsxr k1s tho.
Let me know how you get on with the calipers Scott wont ya
Regards
Rich
-
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: CBR 4 Pot Nissin Calipers
btw why dont you like the GSXR1000 calipers?
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
- Scott221
- Restricted
- Posts: 909
- Joined: Tue Jan 16, 2007 6:23 pm
- My Bike: ZXR400 L9
- Location: Bham, U.k
Re: CBR 4 Pot Nissin Calipers
One life, Live it!
-
- L-plate hell
- Posts: 450
- Joined: Wed Mar 12, 2008 12:37 am
- My Bike: K ZXR400 L2, H Rebel 125
- Location: Hemel Hempstead, Hertfordshire
- Contact:
Re: CBR 4 Pot Nissin Calipers
Hi,rene wrote:btw why dont you like the GSXR1000 calipers?
There's just no preasure behind the lever and they work shite. I've already rebuild the calipers twice due to dust seals jamming the pistons open. The rattle on these calipers is unreal when cruising down any road, they rattle and chatter so loud I can hear it over my engine (yes the pads do have copper grease on)
I've just had enough with them to be honest, the only best thing about them is they look the bollox and make bigger bikes brakes look pants.
Regards
Rich
- Scott221
- Restricted
- Posts: 909
- Joined: Tue Jan 16, 2007 6:23 pm
- My Bike: ZXR400 L9
- Location: Bham, U.k
Re: CBR 4 Pot Nissin Calipers
Exactly the same mate. I tried everything. I went through 2 and a half bottles of brake fluid trying the get them to work properly. I tried 3 different brake mastercylinders including one of a gsxe thou and still they were crap. These calipers need a brembo unless they are in tip top condition.
One life, Live it!
-
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: CBR 4 Pot Nissin Calipers
strange because the ones on my ZXR750 are perfect, theres almost 0 traviel on the leaver just pure power!
Maybe its because the 400 disks are to small for all 3 pistions to grab effectivly?
Maybe its because the 400 disks are to small for all 3 pistions to grab effectivly?
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
- Scott221
- Restricted
- Posts: 909
- Joined: Tue Jan 16, 2007 6:23 pm
- My Bike: ZXR400 L9
- Location: Bham, U.k
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: CBR 4 Pot Nissin Calipers
brakes are sh*te on my TL and my 6 pots have been completely rebuilt with all new seals by previous owner.i have rebled and rebled but still naff!!!
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- zxr400 oc member
- Posts: 1918
- Joined: Fri Feb 23, 2007 10:34 am
- My Bike: kwack ZXR750L1
- Location: Northampton
Re: CBR 4 Pot Nissin Calipers
i dont see how thats possible, the disks arnt quite bing enouth on the 750 and there larger disks.Scott221 wrote:They're not. They cover them perfectly.
Ditch them Baz there crap calipers theres nothing that i could find to get them working well.
ZXR750 L1
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
tail tidy, polished bits, custom paint job, k&n, dynojet, Full akropovik, down geared, GSXR calipers, hel brake lines front and rear & clutch line, maxtron resprung froks 120BHP
BikePics page-
http://www.bikepics.com/members/zxr400rene/
- masterofinsanity
- Site Admin
- Posts: 8103
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: CBR 4 Pot Nissin Calipers
rene wrote:
Ditch them Baz there crap calipers theres nothing that i could find to get them working well.
was thinkin of swapping them for the 4 pots on the TLS?
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.