Hi,
as the title said ; Think i blew the headgasket on my ZXR440 (59mm bore) Anybody knows where i can order one?
Thanks,
Joris (Belgium)
headgasket 59mm needed
Moderator: Moderators
- RedexRobB
- Site Admin
- Posts: 7212
- Joined: Fri Aug 30, 2002 7:37 pm
- My Bike: ZXR400L3
- Location: Ipswich, Suffolk
Re: headgasket 59mm needed
TTS sell the big bore kits so i guess they would be the best people to source you a proper head gasket
http://www.tts-performance.co.uk/
http://www.tts-performance.co.uk/
-
- Posts: 2
- Joined: Mon Oct 12, 2009 8:09 pm
- My Bike: zxr440
Re: headgasket 59mm needed
Thanks but i've tried to contact them a few times via e-mail (only answer inquiries via e-mail if from abroad as i've discovered on their site), looks like they're not interested in selling across the water cause i've been getting zilch-tuut-replies
-
- Posts: 38
- Joined: Sat Oct 03, 2009 2:48 pm
- My Bike: zxr400sp race bike
- Location: runcorn, cheshire
Re: headgasket 59mm needed
hi, as far as i know there is no head gasket available for the big bore engine, the normal tactic (including TTS) is to file out a standard gasket to fit. if you have a dremel or somthing along those lines it doesn't take long.
if you should be lucky enough to find the genuine kawasaki kit head gasket, then these have a little more scope for filing out as the compresion area is further out. very hard to find now though.
good luck.
if you should be lucky enough to find the genuine kawasaki kit head gasket, then these have a little more scope for filing out as the compresion area is further out. very hard to find now though.
good luck.