Moved so more ppl see it
Hi guys
already got one opinion on this but wanted to see if everyone elses view is same
ever since I parked blade up for winter, every week to 10days when I go start it uo the clutch is spongy and doesnt fully engage, almost feels like the lever onlynstarts to move clutch halfway thru pulling.
So I crack the bleed nipple and give have a pump of lever, bleed it and its firm lever again and perfect clutch.
following week the same.
Now in the summer and ever since ive had it its been fine and I also left it stood during warmer weather for fortnights at a time.
There are no leaks. But I wondered can the cold weather cause this? Another thought is the fluid could need changing but surely I would have had same issue in summer?
Thoughts?
Thanks
gem
spongy clutch
Moderator: Moderators
- Gemini
- cloning technology
- Posts: 1323
- Joined: Fri Nov 15, 2002 1:57 pm
- My Bike: CBR1000RR4 Fireblade
- Location: Shrewley, Warwickshire
spongy clutch
There's No Explanation For The Way I'm About To Behave!!!
-
- Posts: 12
- Joined: Thu Jan 09, 2014 5:28 pm
- My Bike: zxr
Re: spongy clutch
Have you had the slave cylinder off and made sure the piston seal isnt leaking? I know you say it doesnt have any leaks but if the slave is leaking slightly theres sometimes no trace of a leak unless you take it off and look properly
ZXR 400 track bike project, Ducati 916, Yamaha WR 400, 2x Honda CB400F, VFR 400 nc30
- masterofinsanity
- Site Admin
- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: spongy clutch
have you tried to put a new clutch in it lol
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
- Gemini
- cloning technology
- Posts: 1323
- Joined: Fri Nov 15, 2002 1:57 pm
- My Bike: CBR1000RR4 Fireblade
- Location: Shrewley, Warwickshire
Re: spongy clutch
Changed fluid and all seems well
gem
gem
There's No Explanation For The Way I'm About To Behave!!!
- Mori Man
- Blingmeister
- Posts: 1976
- Joined: Thu May 10, 2007 3:30 pm
- My Bike: ZXR400J2
- Location: JAPAN
Re: spongy clutch
Remove the slave and pump piston out a bit like you would do on a caliper , good clean , light silicone grease and push back in - should make it feel slippery smooth again.Gemini wrote:Changed fluid and all seems well
gem
PS. Stop posting about 'Onda on here


Nothing worse than having an H and not being able to scratch it !
Living life on the edge, SuPposedly
Living life on the edge, SuPposedly
- Gemini
- cloning technology
- Posts: 1323
- Joined: Fri Nov 15, 2002 1:57 pm
- My Bike: CBR1000RR4 Fireblade
- Location: Shrewley, Warwickshire
Re: spongy clutch
what can i say mate, moved onto sunnier climesMori Man wrote:
PS. Stop posting about 'Onda on here![]()
gem
There's No Explanation For The Way I'm About To Behave!!!
- KwakKwak
- zxr400 oc member
- Posts: 462
- Joined: Sun Jun 16, 2013 11:10 pm
- My Bike: ZXR 400L9 2001
- Location: Carrickfergus, Northern Ireland.
Re: spongy clutch
Blade related, mate bought one a few months ago, first of the fuel injected ones - nice nice bike, kept winding me up about vanishing at every opportunity, day before his first go on it, he's up a ladder cleaning his upstairs windows and decides to fall off, fooking his wrist and shoulder
I had to wait many weeks to visit him as I kept pissing myself thinking about it, still do.
He is okay and on the mend, but has refused point blank to let me keep his bike safely stored and warm



I had to wait many weeks to visit him as I kept pissing myself thinking about it, still do.
He is okay and on the mend, but has refused point blank to let me keep his bike safely stored and warm

Does the low seat height reflect the low intelligence? Easier to get an asshole onto.