Is it me or the rear shock section in the L manual is missing? I will need to reset a ride height to stock (bought a bike which someone lowered).
http://www.zxrworld.co.uk/Manuals/L%20M ... r%2012.pdf
The H model has the suspension complete, but has nothing about the stock location of the top shock mount etc. Anyone knows? I can figure it out, but will not have much time, as I will be in on vacation and want to ride instead of wrenching on a bike or figuring out a setup. ...
Thanks
L model rear shock manual section
Moderator: Moderators
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: L model rear shock manual section
Works for me, try >
right click, save as/save target
I have downloaded and attached it to this post.
right click, save as/save target
I have downloaded and attached it to this post.
You do not have the required permissions to view the files attached to this post.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Mon May 19, 2008 11:29 pm
Re: L model rear shock manual section
I should have been more descriptive ... I have no problem to do what you did, to download the pdf files, but if you open the chapter 12 you attached there's nothing about rear shock ...
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: L model rear shock manual section
Ah,
Section 12-4 has the specs for it, what exactly are you after?
Section 12-4 has the specs for it, what exactly are you after?
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Mon May 19, 2008 11:29 pm
Re: L model rear shock manual section
Stock mounting position of the rear shock (actually need it for the front forks too). In another words I want to set the bike to stock ride height. There has to be some section about rear shock mounting and removal. it does look like it's completely missing.
12-4 section has only a table with rebound and preload stock settings, nothing about settings effecting ride height though
Sure, I can ride as is and start slowly dialing it in, based on test rides, but I will not have a time to tinker around .... I hoped people here would have known, since many had their bikes apart as I can see.
12-4 section has only a table with rebound and preload stock settings, nothing about settings effecting ride height though
Sure, I can ride as is and start slowly dialing it in, based on test rides, but I will not have a time to tinker around .... I hoped people here would have known, since many had their bikes apart as I can see.
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: L model rear shock manual section
So you want to know how high the top shock mount sits into the frame?
Set the rear shock to stock settings, as stated in the manual, then adjust the hight adjuster so that the seat is 760mm from the floor with the bike standing upright.
Set the rear shock to stock settings, as stated in the manual, then adjust the hight adjuster so that the seat is 760mm from the floor with the bike standing upright.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Mon May 19, 2008 11:29 pm
Re: L model rear shock manual section
That would work ... where exactly do you read that?
BTW, anything on the stock position of the front forks in the triple clamps?
BTW, anything on the stock position of the front forks in the triple clamps?
- CaNsA
- zxr400 oc member
- Posts: 1741
- Joined: Sat Nov 29, 2008 4:02 pm
- My Bike: ZX6R F1
- Location: Liverpool
Re: L model rear shock manual section
I got teh seat height info from the specs page
http://www.zxrworld.co.uk/zxr400/specs.html
AFAIK, the forks sit in the clamps as far down as possible without gripping the fork tops.
http://www.zxrworld.co.uk/zxr400/specs.html
AFAIK, the forks sit in the clamps as far down as possible without gripping the fork tops.
Moderator & Skilled Ban Hammer Operator!
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
Has this forum helped you out? Say thanks by donating some of your hard earned cash towards running costs.
:: <=-LOADED TELLY BOXES - NO CONTRACT - NO SUBSCRIPTION - PM ME-=> ::
-
- Posts: 25
- Joined: Mon May 19, 2008 11:29 pm
Re: L model rear shock manual section
Thanks, that will do.