Hi All, stuck an entry in for Killalane and was hoping that some on here would know the gearing. Can anyone recommend what (ball park) gearing to run at Killalane with a standard box?
Same question for Scarborough.
Cheers
Derek
Killalane and Scarborough Gearing
Moderator: Moderators
-
- Posts: 127
- Joined: Fri May 08, 2009 2:11 pm
- My Bike: ZXR400L, Trumpet 675
- 400y
- zxr400 oc member
- Posts: 114
- Joined: Tue Aug 30, 2011 11:32 am
- My Bike: ZXR400H1 GSXR600
Re: Killalane and Scarborough Gearing
I would be interested to know the 400 gearing for Killalane too.
-
- Posts: 66
- Joined: Tue Aug 21, 2007 3:29 pm
Re: Killalane and Scarborough Gearing
Hi
For Killalane I use 14/47 or 48.
Cheers Stuart
For Killalane I use 14/47 or 48.
Cheers Stuart
- 400y
- zxr400 oc member
- Posts: 114
- Joined: Tue Aug 30, 2011 11:32 am
- My Bike: ZXR400H1 GSXR600
Re: Killalane and Scarborough Gearing
Cheers Stuart - hope it is going well for you on the Island
From the ManxGP site I read that Cargo has an ankle injury. Bad luck if that him out - hope it is not too bad
From the ManxGP site I read that Cargo has an ankle injury. Bad luck if that him out - hope it is not too bad
-
- Posts: 66
- Joined: Tue Aug 21, 2007 3:29 pm
Re: Killalane and Scarborough Gearing
Thanks for that,sadly bike having teething problems so not done a full lap yet.
Saw Cargo couple days ago. He has a broken lower leg & wrist injury,so he is out,sadly, but seemed in good spirits,despite being taken out by a newcomer.
See you at killalane,all being well.
Cheers Stuart
Saw Cargo couple days ago. He has a broken lower leg & wrist injury,so he is out,sadly, but seemed in good spirits,despite being taken out by a newcomer.
See you at killalane,all being well.
Cheers Stuart
-
- Posts: 127
- Joined: Fri May 08, 2009 2:11 pm
- My Bike: ZXR400L, Trumpet 675
Re: Killalane and Scarborough Gearing
Checked with a few folk re Killalane and general gearing seems to be 15/46 (which is what's still on it from Armoy) so I'll just go with that and see how it goes.
Stuart what power are you putting out? The gearing you're running will give better drive but lower top end speed. Mine is sitting about 74bhp at the rear wheel.
Stuart what power are you putting out? The gearing you're running will give better drive but lower top end speed. Mine is sitting about 74bhp at the rear wheel.
-
- Posts: 66
- Joined: Tue Aug 21, 2007 3:29 pm
Re: Killalane and Scarborough Gearing
Hi Des
Sadly mine is way off what you are putting out,so what you suggest is probably better for a tuned engine.
See you there.
Cheers Stuart
Sadly mine is way off what you are putting out,so what you suggest is probably better for a tuned engine.
See you there.
Cheers Stuart