Common ZXR engine noise on idle...what is it?!?...

Moderator: Moderators

asandilands69
Posts: 49
Joined: Sat Jul 08, 2006 5:04 pm
My Bike: ZXR400 SP / R1
Location: portsmouth

Common ZXR engine noise on idle...what is it?!?...

Post by asandilands69 »

Ello people just after a bit of info really...as im sure you're all aware the ZXR's are pretty common for that horrible noise they sometimes make on idle...but what is it does anyone know? i have asked various people and they all say different things which is very helpful! lol...some say cam chain tentioners some say cam chain itself, some say clutch plates others say clutch baskets!...i've noticed they only seem to start doing it after about 11,000 miles so its obviously something that can be replaced but i dont fancy spending out on a full engine re-build just to find out what it is! lol, so yeah if anyone has managed to sort theirs out let me know please! cheers!! [/b]
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Post by RedexRobB »

Its just noisy parts in general i think, party clutch and partly top end. If you pull the clutch in and out you will hear the noise change.

My friend had a ZXR that only had a few thousand miles on it but the clutch was the noisest id ever heard. He got it changed under warranty which helped for a little while and just for it to return a few hundred miles later.

I wouldnt worry about them, everyone else will say the same, unless of course it is making a right old noise then there is probably something more serious to worry about. Valve clearances will obviously make a big difference if they need doing, and i believe its the clutch plates that make the noise, cos of the wear on the basket.
User avatar
masterofinsanity
Site Admin
Site Admin
Posts: 8111
Joined: Thu Aug 29, 2002 12:36 am
My Bike: Aprilia Tuono Fighter
Location: England
Contact:

Post by masterofinsanity »

exactly what robB says.
Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Post by RedexRobB »

RobB wrote:Its just noisy parts in general i think, party clutch and partly top end. If you pull the clutch in and out you will hear the noise change.
Just to add, that is normal on ZXR. :smt001
asandilands69
Posts: 49
Joined: Sat Jul 08, 2006 5:04 pm
My Bike: ZXR400 SP / R1
Location: portsmouth

Post by asandilands69 »

ok nice one cheers for that mate, its not particularly bad more just annoyin than anything, i've been building the bike for about a yr now and just tryin to get it tip-top, i reckon a nice noisey race system is in order to hide the rattlin!! haha :smt003
asandilands69
Posts: 49
Joined: Sat Jul 08, 2006 5:04 pm
My Bike: ZXR400 SP / R1
Location: portsmouth

Post by asandilands69 »

ere one more thing actually...is that a tail tidy you've put on the back of your bike??? if so....where ya get it???
User avatar
RedexRobB
Site Admin
Site Admin
Posts: 7212
Joined: Fri Aug 30, 2002 7:37 pm
My Bike: ZXR400L3
Location: Ipswich, Suffolk

Post by RedexRobB »

Not a tail tidy, i cut the standard mudguard off and made up my own brackets to fit everything, voila! :smt001
User avatar
diesel
zxr400 oc member
zxr400 oc member
Posts: 512
Joined: Wed Oct 09, 2002 5:47 pm
My Bike: Zx7r
Location: Kings Lynn, Norfolk
Contact:

Post by diesel »

if u got a zxr400 WITHOUT a rattle then id say A; you are lying and B; im ringing the guys in white coats.
Quicker Than Yngwie

Image
User avatar
Xphyral
zxr400 oc member
zxr400 oc member
Posts: 492
Joined: Thu Oct 13, 2005 3:23 pm
My Bike: tomos moped
Location: Scarborough
Contact:

Post by Xphyral »

diesel wrote:if u got a zxr400 WITHOUT a rattle then id say A; you are lying and B; im ringing the guys in white coats.
Boosh!

My 400 has a clutch rattle that drowns out it's scorpion system.

Kwak engines are not for people who get paranoid about engine noises :smt003

My 750 J doesnt have a clutch rattle, but the noises the engine makes vary between knocking, tapping, hissing, clicking and some others i cant describe yet the things healthy as fook. kawasaki dont make bikes that are designed to sound nice idling while you pose next to it. :smt019
Image

The trouble with having an open mind, is that people will insist on coming along and trying to put things in it.
asandilands69
Posts: 49
Joined: Sat Jul 08, 2006 5:04 pm
My Bike: ZXR400 SP / R1
Location: portsmouth

Post by asandilands69 »

lol ok mate well cheers for that...mine isnt quite that bad so i think i'll look out for a nice Beet race system to drown out the noise of my engine for now...so if anyone has one and fancies selling it unlikely as that is...let me know! :smt001
User avatar
deviant
zxr400 oc member
zxr400 oc member
Posts: 1352
Joined: Thu Jun 02, 2005 9:50 am
My Bike: ZXR400 L3
Location: Nottingham, UK
Contact:

Post by deviant »

diesel wrote:if u got a zxr400 WITHOUT a rattle then id say A; you are lying and B; im ringing the guys in white coats.
or C: you're deaf
In the garage:
Kawasaki ZXR400 L3 - shiny
Suzuki DR800 - bouncy
1978 Suzuki GS400 - PROJECT RETRO RACER!
Kawasaki GPz500S - for sale soon
Honda CG125 BR-J - in bits
Bozzie
zxr400 oc member
zxr400 oc member
Posts: 136
Joined: Fri May 26, 2006 6:59 pm
My Bike: tomos moped
Location: Nottingham, UK
Contact:

Post by Bozzie »

or D your for got to start your bike....worst thing i actually did this....with a Race Can


*Goes Hiding*
Image
User avatar
Xphyral
zxr400 oc member
zxr400 oc member
Posts: 492
Joined: Thu Oct 13, 2005 3:23 pm
My Bike: tomos moped
Location: Scarborough
Contact:

Post by Xphyral »

Bozzie wrote:or D your for got to start your bike....worst thing i actually did this....with a Race Can


*Goes Hiding*

Yeah but how many times do you go to set off and almost redline your bike because you forogt to put it in first gear? :smt003
Image

The trouble with having an open mind, is that people will insist on coming along and trying to put things in it.
Jackson
Posts: 47
Joined: Tue Dec 12, 2006 9:20 am
My Bike: tomos moped
Location: Loughborough

Post by Jackson »

almost as bad as going to pull off in front of a crowd of people watching, then the bike cutting out cause the site stand is stiil down - thats always a stinker! :smt003
Bozzie
zxr400 oc member
zxr400 oc member
Posts: 136
Joined: Fri May 26, 2006 6:59 pm
My Bike: tomos moped
Location: Nottingham, UK
Contact:

Post by Bozzie »

oh and i did that one. obviously previous owner didnt like teh side stand switch. went to turn left and rose up in my seat ;)
Image
Post Reply