
Hello all
Moderator: Moderators
- masterofinsanity
- Site Admin
- Posts: 8111
- Joined: Thu Aug 29, 2002 12:36 am
- My Bike: Aprilia Tuono Fighter
- Location: England
- Contact:
Re: Hello all
read my build thread and you'll find out and watch the bike meets thread and you would have known about the meet 

Don't forget people there is more to the zxr400 than this forum... check out www.zxrworld.co.uk also.
-
- Posts: 17
- Joined: Sun Sep 02, 2007 5:52 pm
- My Bike: CBR600f at the mo.
- Location: here,
Re: Hello all
Thank you about the steering damper im gunna see how she corners and how viby them bars are and if it could do with one i shall bolt one onzimm wrote:hi, bike sounds nice ... you MUST post pics when you have it.
steering damper mount is on the frame as standard, so its an easy bolt on job... shouldnt need one though

again thanks about the bike i cant wait its getting closer and closer to that magic day

thanks all and HOPE you do have a meet somewhere up this area so i can go for a blast on my newbie bike.... see what she handles like (bet its different than this cbr) im a bit of a kneedown nutter do they handle that well? i have so many questions to ask about these bikes but i wont ill just get my head stuck in and read all the posts everone has posted they must answer some of my questions

Just sat doing this at the moment

cheers all take care, talk soon
Wendy
You cant run away forever, But there's nothing wrong with getting a good head start.....
-
- Full Licence rider
- Posts: 1372
- Joined: Fri Feb 16, 2007 10:36 am
- Location: Wolverhampton
Re: Hello all
are these CBR's that bad cos im saving up for one n should have enough scraped together soon for a nice RR. if they are that bad i might consider the r6 again????? im goin for 53 to 04's an all. so nothing new incase i trash it... anyay hope they aint that bad. but to your question YEAAAAAAAAAA you will get the knee down wicked i tel ya i had the bike a week an got my toes down (althoe it shat me up) it was cool. i recon if your balls were big enough (figure of speech
) you could get the pegs down 


Remember speed kills, so does smoking, drinking, drugs, fast food and many more good things
- mycallsevern
- Posts: 170
- Joined: Thu May 17, 2007 10:42 am
- My Bike: ZXR400 L3 UK spec
- Location: Exeter
- Contact:
Re: Hello all
You can get the pegs down very easily, though I would not advise it as when it happened to me on the local Tesco's roundabout the peg dug in and suddenly the back end was in front of me, alright though as my R&G's did their job so just a new wing mirror.superman wrote: i recon if your balls were big enough (figure of speech) you could get the pegs down
But you can go really low on them, I'm trying to get my elbow down on mine at the moment, about half an inch off I think!
Rubber side down, rubber side down, rubber side down.
-
- Full Licence rider
- Posts: 1372
- Joined: Fri Feb 16, 2007 10:36 am
- Location: Wolverhampton
Re: Hello all
ah the old elbow down followed by the knee head etc
..
i need to get my mo jo back i tell ya. sayin that my bike needs a good service first

i need to get my mo jo back i tell ya. sayin that my bike needs a good service first

Remember speed kills, so does smoking, drinking, drugs, fast food and many more good things
-
- Posts: 17
- Joined: Sun Sep 02, 2007 5:52 pm
- My Bike: CBR600f at the mo.
- Location: here,
Re: Hello all
superman wrote:are these CBR's that bad cos im saving up for one n should have enough scraped together soon for a nice RR. if they are that bad i might consider the r6 again????? im goin for 53 to 04's an all. so nothing new incase i trash it... anyay hope they aint that bad. but to your question YEAAAAAAAAAA you will get the knee down wicked i tel ya i had the bike a week an got my toes down (althoe it shat me up) it was cool. i recon if your balls were big enough (figure of speech) you could get the pegs down
i have only been lucky enough to have a quick go on the RR on a test ride BUT they are totally different to my bike they are good wheelie machines (made naked with renthel bars


And thank you about the knee down i can do it on the CBR (great bike for knee down too) but as any new (to me) bike i will have to take things slow

Oh and i have done a trackday on this cbr and they go like hot ckaka so the RR will be even better
Have fun on your new cbr i know i have, happy new bike

Wendy
P.S now i dont wanna get rid of myne....... dammit!!
You cant run away forever, But there's nothing wrong with getting a good head start.....
-
- Posts: 17
- Joined: Sun Sep 02, 2007 5:52 pm
- My Bike: CBR600f at the mo.
- Location: here,
Re: Hello all
You can get the pegs down very easily, though I would not advise it as when it happened to me on the local Tesco's roundabout the peg dug in and suddenly the back end was in front of me, alright though as my R&G's did their job so just a new wing mirror.mycallsevern wrote:superman wrote: i recon if your balls were big enough (figure of speech) you could get the pegs down
But you can go really low on them, I'm trying to get my elbow down on mine at the moment, about half an inch off I think! ARGHHHHHHHHHHH!!!!



im looking forward to this bike and at the same time absolutly cacking myself with all the things you all have said
You cant run away forever, But there's nothing wrong with getting a good head start.....
-
- Full Licence rider
- Posts: 1372
- Joined: Fri Feb 16, 2007 10:36 am
- Location: Wolverhampton
Re: Hello all
ah thanks so they are pretty good then well that sorts afew things out for me then, i think iv made up my mind 

Remember speed kills, so does smoking, drinking, drugs, fast food and many more good things