L CARBS ON A H?

lewisdale · Post by **lewisdale** » Wed Feb 18, 2009 8:35 pm

does this work ok? need to know asap please as im about to buy some

Post by **jake** » Wed Feb 18, 2009 9:12 pm

yes.
make sure they are 32mm ones tho. they may need rejetting to suit, just pull all the heater things off them if they have them.

lewisdale · Post by **lewisdale** » Thu Feb 19, 2009 1:18 am

hi why would they need rejeting? so i can not take them straight of a L and put them on a H?

RedexRobB · Post by **RedexRobB** » Thu Feb 19, 2009 7:13 am

no, cos the airbox is a different size.

Post by **deviant** » Thu Feb 19, 2009 8:38 am

did it (albeit by putting an H engine into an L). Worked fine, no changes.

lewisdale · Post by **lewisdale** » Thu Feb 19, 2009 2:14 pm

so i will need a L airbox?

Post by **rene** » Thu Feb 19, 2009 2:24 pm

you dont need a new airbox no.

lewisdale · Post by **lewisdale** » Thu Feb 19, 2009 2:27 pm

thats good then coz ive just payed for a set of L carbs, glad they will go straight on

stug · Post by **stug** » Thu Feb 19, 2009 6:46 pm

Some of the jets are a different size (main jet) and air screws are a different number of turns out.

lewisdale · Post by **lewisdale** » Thu Feb 19, 2009 11:41 pm

they are off a 92 model?

www.zxrworld.co.uk