1) would a kink in the coolent hose to the carbs cause any probs its a tight fit aginst the frame ?
2) i didnt clean the powder coating from any of the earth points the fuel pump one
3 ) and do the coil packs need to be earthed to the frame ie the mounting points do they have to be bolted to the exposed alloy of the frame
the tank was stored in my meatal shed for a few months it does get damp in the winter but i filled the tank on friday and surely wouldnt it be effecting the hole rev range if it was water in the fuel and the carbs where striped down during the resto and cleand

any help would be great
