Gonna service the ZXR at the weekend, as I think its time I actually did it.
I have 4 x NGK IX IRIDIUM plugs, an oil filter and 4 litres of Silkolene Comp 4 10W-40.
Am I correct in thinking that the following process is correct? (Not done one before, although pretty methodical and seem to be getting handy with a spanner)
1) Remove lower fairings
2) Place oil tray under bike and remove sump plug
3) Remove oil filter (Screwdriver through it if won't come off)
4) Smear oil on the lip of the filter, and re-fit - tightening 3/4 turns by hand
5) Refit sump plug - Hand tighten, and then half a turn with spanner?? (Dont have torque wrench)
6) Refill with oil
7) Remove tank and fit plugs
Sound right?
Is the sump plug tightness about right?
Oil is looking crappy atm, and plugs defo need a change!
Cheers

P.S - Anybody from Scunthorpe area?
